Skip to Content

Infrared Beam Warning System 30M (Construction Fall Prevention Alert)

Site Edition
Inquiries welcome. Please contact sales for a complete solution and quotation.

Terms and Conditions
Stock and lead time vary by product; the formal quotation prevails

Infrared Beam Warning System (Dual-Beam Through-Beam)

Installed as a pair of an emitter and a receiver; an intrusion is judged only when both infrared beams are blocked at the same time, reducing false alarms from birds, fallen leaves and small animals. The output is a dry contact with adjustable normally-closed / normally-open that can link to a voice & strobe alarm, suited to temporary construction warning areas such as site edge fall prevention, floor-slab openings, stair openings, elevator shafts and entrance perimeters.

ABT dual-beam infrared through-beam detector appearance

Core Specifications

Dual Beam
2 beams
Infrared beams
Alarm only when both beams are blocked
30m
Detection Distance
Emitter aligned to receiver
IP65
Ingress Protection
Outdoor waterproof and dustproof
−25~55℃
Operating Temperature
Heater optional for low temperatures

Product Features

Dual-beam simultaneous interruption detection

An alarm sounds only when both beams are blocked at the same time, reducing false alarms from small animals, birds and fallen leaves.

Adjustable sensitivity and blocking time

4–5 sensitivity levels and a blocking time adjustable from 50–700 ms, tuned to the site environment.

Selectable normally-closed / normally-open output

The alarm output can be switched between normally closed and normally open for easy connection to existing alarms or controllers.

Tamper output

A normally-closed tamper output triggers when the housing is removed, preventing deliberate damage.

Adjustable optical axis angle

Horizontal 180° (±90°) and vertical 20° (±10°), so the optical axis can be aimed to fit the site.

Outdoor protection

IP65 protection, operating temperature −25℃ ~ +55℃, with an optional heater for low-temperature environments.

Installation and Wiring

When installed on the side of a wall, use an L-shaped bracket (bracket sold separately). Fix the emitter and receiver facing each other, each connected to a DC 12–24V power supply at its own end; the receiver also has signal outputs (normally open, normally closed, common). The housing can rotate 180 degrees left and right for easy installation in many settings.

Wall side installation illustration

Technical Parameters

Product NameABT two-beam / dual-beam infrared through-beam detector
Supply VoltageDC 12V–24V
Operating Current40–90 mA
Detection Distance30 meters
Number of Infrared Beams2 beams
Alarm MethodSimultaneous beam interruption detection
Alarm OutputNormally closed / normally open adjustable
Blocking Time Adjustment4–5 sensitivity levels adjustable
Blocking Time50–700 ms adjustable
Tamper OutputNormally closed, triggers when the housing is removed
Optical Axis AngleHorizontal 180° (±90°), vertical 20° (±10°)
Ingress ProtectionIP65
Operating Temperature−25℃ ~ +55℃
MaterialPC engineering plastic + ABS body
HeaterOptional

Compatible Systems