Skip to Content

Face Recognition Access Tablet (Floor Standing, TR307D)

Site Edition Factory Edition
Inquiries welcome. Please contact sales for a complete solution and quotation.

Terms and Conditions
Stock and lead time vary by product; the formal quotation prevails

Product Overview

The TR307D is the floor-mounted version of the TR307 series, with a separate aluminum alloy post, total height 1542mm and camera height 1460mm above ground, needing no wall, turnstile or other support structure, and works independently once fixed to the ground. Suited to site plazas, temporary control points, open entrances and other places with no wall to use, making it the best choice for flexible deployment. Can be paired with the 4S360 site real-name management system for face-scan entry, safety ID card control and attendance records.

Key Performance Indicators

TR307D Floor-Standing
99.7%
Recognition Accuracy
Dual-lens liveness detection, anti-photo attack
0.2s
Recognition Speed
Matching completed in ≤ 0.2 seconds
1542mm
Overall Height
Camera 1460mm above ground
20,000 records
Face Database Capacity
1:N,N ≤ 20,000

Unique Advantages of the Floor-Standing Model

No wall needed
Standalone floor installation

Does not depend on a wall or turnstile; fixed directly to the ground (4 Φ16 expansion screws), suited to temporary sites, plazas and open spaces.

Standard ergonomic height

Camera 1460mm above ground, within the recognition range (0.3–4 meters) for most adult heights, so it works normally without special adjustment.

Flexible deployment

The post can be removed and reinstalled, so the unit can be moved and reused when the site changes, lowering hardware investment cost and suiting rotation across multiple sites.

Eye-catching identification marker

The floor post has a blue LED indicator strip that stands out visually on site and guides people to approach and scan their face on their own, reducing the need for management staff to intervene.

Floor-Standing Installation Steps

1
Confirm floor hole positions

Mark the drilling positions on the floor per the floor bracket hole dimensions (base 300×230mm, hole spacing 225.5×155.5mm, hole diameter Φ16mm) and install 4 Φ16 expansion screws.

2
Fix the floor post

Insert the floor post over the expansion screws at the hole positions, tighten the fixing screws and put on the base cover. Confirm the post is vertical and stable before wiring.

3
Install the head unit

Floor installation requires the dedicated wall-mount bracket B1: fix the TR307D head unit on top of the post, adjust the recognition angle and tighten.

4
Cable routing and wiring

Route the power and network cables through conduit inside the post to avoid exposure and damage. Connect DC 12V power and the RJ45 network cable, then power up and test recognition.

Floor base specifications

Base size 300 × 230mm
Hole spacing 225.5 × 155.5mm
Hole diameter Φ16mm × 4
Overall height 1542mm
Camera height above ground 1460mm
Required accessory Dedicated wall-mount bracket B1

Key Functional Features

Dual-lens liveness detection

A depth lens paired with an RGB lens effectively defends against photo and video attacks, ensuring only real people can pass.

Multi-credential authentication

Supports face recognition, IC/ID card and password door opening, which can be combined flexibly, balancing security and convenient access.

Adapts to complex lighting

A wide dynamic range camera with white and infrared fill lights recognizes reliably in backlight and low light.

Blacklist alerts

Blacklisted people trigger an immediate alert, and the system pushes LINE / Teams notifications to managers automatically for prompt handling.

Attendance / access control mode switching

Supports one-tap switching between attendance mode and access control mode, so the same device covers both attendance records and access control.

Offline operation

Embedded offline recognition keeps working when the network is down, and records sync to the 4S360 platform automatically once the network returns.

TR307 Series Model Comparison

Wall-mount
TR307B
  • Wall-mounted installation
  • 241×126×21.6mm
  • IO input (door contact / fire alarm)
  • Offices and corridors
Turnstile Type
TR307L
  • Mounted on top of the tripod turnstile
  • 354.5×126×21.6mm
  • Two-way lane entry/exit control
  • Standard configuration for real-name site entry
This model
TR307D Floor-Standing
  • Standalone floor post
  • Total height 1542 mm
  • Camera 1460 mm above ground
  • Flexible deployment, no wall needed
  • Plazas and temporary control points

Applications

Site plazas and temporary entrances
Public works sites with no walls
Open lanes in factory grounds
Campus plazas and playground entrances
Mall and exhibition entry control
Community courtyards and outdoor access control
Moved and reused across multiple sites
Temporary ID verification at events

Need advice on choosing a floor-standing model or planning its installation?

We provide complete floor-standing installation assessment, floor hole layout planning and 4S360 system integration consulting.

Compatible Systems